Repeaters: Mobile Amplifier Products

The mobile booster system installed into your vehicle can improve your wireless phones signal strength up to 3 watts. This gives your phone maximum performance in rural/remote & weak signal strength areas.

There are two choices available for mobile amplifier systems, please note these products are carrier specific and available for all carriers. It is important to know who your wireless provider is.

There are two options available for the mobile booster system. Both of these options require an external antenna:

Direct Connect

Requires an adaptor and connects to the back of the cell phone (available for most makes and models-contact us to check availability for your phone) Each Direct Connection Amplifier System contains an amplifier, a 6-foot coaxial extension cable that connects to an external antenna adapter (not included), and a power cable that plugs into a 12-volt cigarette lighter adapter.

Wireless

No physical connection required works with all cell phones and data cards. Each Mobile Wireless Amplifier System contains an amplifier, a Low-Profile inside antenna, a 6-foot coaxial extension cable, a universal external antenna adapter, and a power cable that plugs into a 12-volt cigarette lighter adapter.

In-Building Amplifiers: Direct Connection

Connects Directly into Your Phone With an Adapter

Puts the improved signal directly into your cell phone or cellular data card through a coaxial cable and adapter and gives you maximum signal performance for rural or remote locations.

• Requires a physical cable connection to your phone or cellular data card
• No signal loss because of the direct connection
• Best performance in rural or remote locations
• Can be used in buildings
• Adapters available for most phone and cellular data card models
• Must have an external antenna

Each Direct Connection Amplifier System contains an amplifier, a 6-foot coaxial extension cable that connects to an external antenna adapter (not included), and a power cable that plugs into a 12-volt cigarette lighter adapter. You will also need at least one outside antenna and at least one length of coaxial cable to connect the antenna to the amplifier.

Antennas, cables and a 120-volt AC/DC power supply for in-building use are sold separately.

In-Building Amplifiers: Wireless

Requires No Physical Connection to Your Phone – It's Wireless

Transmits and receives an improved wireless signal inside your home or building and requires no physical connection to your phone.

• Requires NO Physical Cable Connection to Your Phone or Cellular Data Card
• The System Can Be Used By Multiple Phones and Cellular Data Cards
• Works With All Cell Phone and Cellular Data Card Models
• A Little More Expensive Than a Direct Connection Amplifier
• Inside Signal Range May Vary With Signal Strength
• Must Have an Outside Antenna and an Inside Antenna

Each In-Building Wireless Amplifier System contains an amplifier and a power supply that plugs into a standard 120-volt wall outlet. You will also need at least one inside and one outside antenna and at least two lengths of coaxial cable to connect each antenna to the amplifier.

Antennas and cables are sold separately.

Call for pricing-These systems require an on-site inspection and signal reading before an installation quote can be given. Site Reading-$75.00

Portable Amplifier Products

zBoost zP

The zBoost zP is the personal cell phone signal booster. Designed to increase coverage for the desktop area, the zBoost dual band cell phone signal booster extends a zBoost Cell Zone for a single user at their work area. (If you need coverage greater than 4-6 ft, please try our zBoost for the home YX510 DualBand.) zBoost zP uses patent pending technology to protect the carrier network. zBoost zP is Dual Band and compatible with all phones operating on PCS(1900Mhz) and CEL (800 MHz) except Nextel.

Wi-Ex zBoost

The Wi-Ex zBoost is a revolutionary, patent-pending new product that improves indoor cell phone coverage. zBoost captures the wireless signal outside, brings it inside and enhances, or boosts it - Extending a Cell Zone in your home or office or your car.

Unlike other devices, our patent-pending technology protects the carrier network.

zBoost repeats and amplifies the signal and is frequency dependent. zBoost works with most phones and carriers (except Nextel) and comes in 4 models. Check this website to know what frequency your carrier is operating in your zip code. zBoost YX500-PCS - works with all phones on the 1900MHz frequency. Includes Sprint, T-Mobile and others

• zBoost YX500-CEL - works with all phones on the 800MHz frequency. Includes some models of Verizon and Cingular and others
• zBoost YX510-PCS-CEL - works with all phones simultaneously at both frequencies CEL - 800MHz and PCS -1900MHz.
• zBoost zP YX300 - Dual Band for your personal workspace- covers 4-6 ft and works with all phones at both frequencies CEL-800MHz and PCS-1900MHz. (Does not work with Nextel.)

Digital Antenna Dual Band 50dB Repeater

A cost effective solution to poor cellular reception inside homes, offices, dorm rooms and condominiums, the PowerMax personal repeater provides reliable and clear cell phone communication equivalent to the cell signal strength available outside the building. A simple Do-It-Yourself installation with no tools required allows the system to be installed anywhere.

• Compact and easy to install
• Coverage up to 500 square feet
• Donor antenna mounts to a window
• Includes 15' of cable with attached N male & Mini-UHF male connectors
• Multiple cell phone users
• Repeater unit has a built-in, 9dB gain antenna
• Requires 10 feet of separation between window antenna and the repeater unit